Parameter Configuration; Parameter Setup Procedure - Good Practice - Danfoss PVED-CLS User Manual

ENGINEERING TOMORROW

Parameter configuration

The PVED-CLS contains more than 170 configurable parameters, which are divided into 15 sectors and 3 different
PSAC user-levels (see tab "User" in the parameter list, paragraph 17.4), each having their own unlock code:
•
Danfoss (access to all parameters)
•
OEM
•
Dealer
Hydraulic Config
SEHS FDA
Valve Calibration Data
CAN WAS Calibration Data
Analog Sensor Calibration Data
Peripherals Config
SEHS Protocol Data
Internal Monitoring
Vehicle Geometry
GPS Config
STW Config
AUX Config
Production/Calibration Flag
Auto Calibration Config
OEM Data
Attention
Unlock codes, for the different user levels, are managed by Danfoss technical support team and can only be aquired by
directly contacting the Danfoss technical support team!
Danfoss has developed a service tool (PLUS+1 SERVICE TOOL), and recommend the tool for:
•
Changing parameters in the EEPROM
•
Download of Software and bootloader
•
Enable/disable diagnostic messages (status messages 1 - 7) on the CANbus
•
Execute auto-calibration functionalities for WAS and Spool
•
Controlling the spool manually for diagnostic purposes
•
Extracting diagnostic data from the PVED-CLS (error history, temperature histograms etc.)
4.1 PARAMETER SETUP PROCEDURE – GOOD PRACTICE
When booting up a PVED-CLS for the very first time, it is good practice to follow this procedure:
28 | © Danfoss | August 2018
3072 3121 50
3122 3161 40
3162 3184 23
3185 3204 20
3205 3236 32
3237 3286 50
3287 3350 64
3351 3420 70
3421 3450 30
3451 3520 70
3521 3645 125
3646 3770 125
3771 3790 20
3791 3863 73
4212 4311 100
Table 3
3097 3120 40
3134 3160 42
3171 3183 44
3196 3203 46
3226 3235 48
3253 3285 50
3330 3349 52
3394 3419 54
3429 3449 56
3495 3519 58
3585 3644 60
3742 3769 62
3778 3789 -
3846 3862 64
- - -
AQ00000211
OEM
OEM
OEM,
Dealer
OEM,
Dealer
OEM,
Dealer
OEM
OEM
OEM
OEM,
Dealer
OEM
OEM
OEM
OEM
OEM,
Dealer
-