Motor Circuit Error; Lamp Circuit Error - Fujitsu fi-7300NX Operator's Manual

Motor Circuit Error

Motor Circuit Error
When a motor circuit error occurs, the [Error] screen on the touch screen displays one of the following codes.
H0:84
H1:80
H2:81
H8:88
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.

Lamp Circuit Error

When a lamp circuit error occurs, the [Error] screen on the touch screen displays the following code.
H7:84
Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
152
Troubleshooting