The Display On The Touch Screen Is Distorted - Fujitsu fi-7300NX Operator's Manual

The Display on the Touch Screen Is Distorted

Check the following points
● Did you turn the scanner off then back on? (page 165)
If the problem persists, check the items in
first, then contact the distributor/dealer where you purchased this product. Or, make an inquiry by
referring to the contact information at the Contact for Inquiries section in Safety Precautions bundled with
this product.
●
Did you turn the scanner off then back on?
Solution
Turn the scanner off then back on.
Wait for at least 5 seconds after turning off the scanner before turning it back on.
For details, refer to
Before You Contact the Scanner Service Provider (page 213)
How to Turn the Power ON (page
165
55).
Troubleshooting