Sensor Error - Fujitsu fi-7300NX Operator's Manual

Sensor Error

Sensor Error
If a sensor error occurs, the [Error] screen on the touch screen displays one of the following codes.
L0:11
L2:13
L6:1B
Take the following measures.
● Clean the ultrasonic sensors and the document sensors by referring to
(ADF) with a Cloth (page
● Turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
119).
153
Troubleshooting
Cleaning the Inside of the Scanner