Fujitsu fi-7300NX Operator's Manual page 86

HINT
● The accuracy of detection for overlapped documents may drop depending on the document type.
Overlapping cannot be detected for the top 30 mm (1.18 in.) of a document in the feeding direction.
● On the [Multifeed Detection Area] screen, you can specify an area not to detect overlapping of documents
within the area described in Fig. 1 in
The [Multifeed Detection Area] screen can be displayed in the following procedure:
→ [Scanner Settings] → [Paper Source/Feeding] → [Multifeed Detection Area]
When using the Software Operation Panel, refer to
Documents (Multifeed) (page
Area Not to Be Perforated (page
Settings Related to the Detection for Overlapped
283).
86
How to Load Documents
84).