Settings Related To Sheet Counters; Checking The Sheet Counter - Fujitsu fi-7300NX Operator's Manual

Settings Related to Sheet Counters

Checking the Sheet Counter

The status of each consumable part can be viewed to determine when to replace or clean the consumables.
The background color of the counter changes as it gets closer to the time to replace the consumables or to clean the
scanner.
The color of each counter changes as follows:
● [After cleaning] counter
This counter turns yellow when the sheet count after cleaning reaches the value specified in
Cycle [Cleaning Cycle] (page 263)
● [Brake Roller]/[Pick Roller] counters
These counters turn light yellow when the sheet count after the consumable replacement reaches 95% of the
value specified in Replacement Cycle of Consumables [Life Counter Alarm Setting] (page 264)
Operation Panel, and turn yellow when the sheet count reaches 100%.
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting].
In this window, you can check the following items:
Total Count (ADF)
Total number of sheets scanned using the ADF
in the Software Operation Panel.
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
241).
259
Scanner Cleaning
in the Software