ELECTRO FREEZE SLX400E Operator's Manual page 32

ELECTRO FREEZE Soft Serve Models SLX400E, SLX500
8.2 Disassembly Instructions
3. From the dispense head (1, figure
8-2) remove the handle pin (7),
handles (9,10),plungers (5,3) and
nozzles (11) . Remove head o-rings
(2) and the o-rings from plungers (4) .
5. Remove hopper cover, drip tray and
insert.
6. Remove the mix feed tube (figure 8-4)
from the hopper.
7. Remove the O-rings (3) from the mix
feed tube (1). Remove the regulator
(2) from the mix feed tube.
SHAFT - ASSY
BEATER
BLADE - SCRAPER
Figure 8-3
22
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so could
create a health hazard.
BAR -BREAKER
(continued)
SLEEVE - REAR MIX FEED
Figure 8-4
LUBRICATE
HERE
SEAL - BEATER SHAFT
INSERT - MIX FEED TUBE
TUBE - REAR MIX FEED
O-RING
BLADE - SCRAPER
LUBRICATE
HERE
WASHER - DOUBLE
SHAFT SEAL
184584