Table of Contents
Advertisement
ELECTRO FREEZE Soft Serve Models SLX400E, SLX500
14.1
Virtual Quality Management (VQM) System
Display Trouble Shooting Messages (continued)
What the
Action taken
display will
in unit when
read
error is
present
Affected side
compressor
and beater
Spigot
motor are off,
until condition is
reset
Affected side
compressor
and beater
C Spigot
motor are off,
until condition is
reset
46
Detailed
Method to
description
reset error
Error will
If unit is in Clean
automatically
or Off Mode, unit
reset once
will restore in Off
issue has been
Mode.
rectified
Displays Spigot
Error will
if the Left or
automatically
Right Side Spigot
reset once
switch is engaged
issue has been
for more than 5
rectified
minutes.
Probable cause of
Error Code
1. Plunger is sticking due
to lack of lubrication, worn
o-rings.
2. Plunger push rod is
sticking/not returning
automatically
3. The wrong plunger push
rod is being used.
4. The plunger switch
spring is worn out.
5. The plunger switch is
malfunctioning
1. Plunger is sticking due
to lack of lubrication, worn
o-rings.
2. Plunger push rod is
sticking/not returning
automatically
3. The wrong plunger push
rod is being used.
4. The plunger switch
spring is worn out.
5. The plunger switch is
malfunctioning
Remedy
1. Disassemble unit
and check o-rings
and ensure proper
lubrication.
2. Check to ensure
push rod is not bent
or distorted in any
way
3. Install the correct
push rod or call
your Electro Freeze
Distributor to order
the correct push rod.
4. Contact your
Electro Freeze
Distributor for
Service.
5. Contact your
Electro Freeze
Distributor for
Service.
1. Disassemble unit
and check o-rings
and ensure proper
lubrication.
2. Check to ensure
push rod is not bent
or distorted in any
way
3. Install the correct
push rod or call
your Electro Freeze
Distributor to order
the correct push rod.
4. Contact your
Electro Freeze
Distributor for
Service.
5. Contact your
Electro Freeze
Distributor for
Service.
184584
Hide quick links:
Advertisement
Table of Contents
