Installing Ap1000E; Safety Precautions - Meru Networks AP1000 Installation Manuals

AP1000e is supported by System Director versions 5.1 and greater. This chapter describes how to install
and configure an AP1000e. It contains the following sections:

Safety Precautions


Best Practices for a Mixed Network

Unpack the AP1000e

Power Requirements

Additional Equipment


Installing AP1000e


Restoring AP1000e Settings

Check AP1000e LEDs

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
Warning!
The AP1000e is only intended for installation in Environment A as defined in IEEE 802.3af. All directly
interconnected equipment (e.g., equipment sharing an electrical source) must be contained within the
same building, including the interconnected equipment's associated LAN connection.
© 2013 Meru Networks, Inc.
This product is intended to be supplied by a UL Listed power supply
marked Class 2 or LPS and rated minimum 5Vdc, 3A.
Chapter 3
Installing AP1000e
Safety Precautions
Installing AP1000e 29