Meru Networks AP1000 Installation Manuals page 31

Mount AP1000i on a Wall
The AP1000i attaches directly to the wall. To mount an AP1000i on sheet rock or wall studs, follow
these steps:
1. Attach two appropriate screws (see
inches apart (76mm) as shown below
Figure 17: AP1000i Wall Bracket
Wall mount with screws.
2. Attach the PoE Ethernet cable to the Ethernet port shown in
Caution!
mistakenly be plugged into the Console port; if you do this. the AP won't power up.
Figure 18: AP1000i Ethernet Port
3. Align the screws on the wall with the keyholes on the AP and slide the unit down slightly. See
17.
© 2013 Meru Networks, Inc.
Additional Equipment
(Figure 17).
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
Installing AP1000i
for screw information) to the wall 3
Figure 18.
Figure
Installing AP1000i 19