Meru Networks AP1000 Installation Manuals page 66

Installing AP1014i
Mount AP1014i on a Wall Using the Optional Locking Kit
The AP1014i locking wall mount kit (840-00052 MNT-WMKIT-01)contains a wall bracket, screws, and a
locking key. To mount an AP1014i on sheetrock or wall studs with this kit, follow these steps:
1. Attach AP1014i to the bracket as shown in Figure 55.
Figure 55: Attach AP1014i to Wall Bracket
Wall mount bracket
2. Insert the locking key and apply a small suitcase lock as shown in Figure 56.
54 Meru Access Point Installation Guide © 2013 Meru Networks, Inc.