Meru Networks AP1000 Installation Manuals page 29

Mount AP1000i on an Interlude T-Bar
The mounting procedure for a ceiling that has interlude T-Bar supports is similar to that of mounting
on a suspended ceiling. However, this procedure requires a specialized mounting bracket (ACC-MNT-
SCRMKIT-04), as depicted in
Figure 13: T-Bar Mounting Bracket
1. Remove the ceiling tile alongside which the AP will be mounted.
2. Be sure that AP1000i is not locked by inserting the locking key into the Unlock mechanism as shown
in Figure 10 below.
Figure 14: Unlock AP1000i
Key
3. Align the mounting bracket with the AP1000i slots used for the ceiling t-bar in the previous section
(as shown in Figure
© 2013 Meru Networks, Inc.
Figure 13.
UNLOCK
6).
Installing AP1000i
Installing AP1000i 17