Meru Networks AP1000 Installation Manuals page 59

Figure 42: Install AP1014i Below a Suspended Ceiling
AP1000
4. Press down on the tab indicated in
5. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet
connector shown in
Caution!
ports can be used to connect wired clients to the AP.
Figure 43: AP1014i Green Uplink Port
6. If you want to lock AP1014i in place, use the supplied locking tool to press the AP1014i locking
mechanism shown in
© 2013 Meru Networks, Inc.
(in ceiling)
Figure 42
Figure 43 below.
Be sure to connect the Ethernet cable to the green uplink port. The yellow
Figure 44.
above and rotate the AP1014i into place.
Installing AP1014i
Installing AP1014i 47