Restoring Ap1000E Settings; Check Ap1000E Leds - Meru Networks AP1000 Installation Manuals

Restoring AP1000e Settings

Trigger the Restore mechanism to return the AP1000e to the factory default settings. This overrides
any changes that have been made from the controllers. Note that this restore mechanism differs from
the ones on the other APs. Instead of a straight paper clip, you need to use a paper clip bent at a right
angle to push the mechanism trigger located on the inside as indicated in the Figure below. Access it
through the small hole with the bent paper clip. Press and hold the button for 10 seconds. After 10
seconds, the AP reboots and comes back up with default settings.
Figure 38: AP1000e Restore Button
Console USB
port port
USB
CONSOLE

Check AP1000e LEDs

Figure 39: AP1000e Status LEDs
Activity
Power
© 2013 Meru Networks, Inc.
Ethernet
port
RES E T
G1
LEDs
DC 5V
Restoring AP1000e Settings
Installing AP1000e 39