Meru Networks AP1000 Installation Manuals page 24

Installing AP1000i
Figure 6: Install AP1000i Below a Suspended Ceiling
AP1000
4. Press down on the tab indicated in
5. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet
connector shown in
Caution!
mistakenly be plugged into the Console port; if you do this, the AP won't power up.
Figure 7: AP1000i Ethernet Port
6. If you want to lock AP1000i in place, use the supplied locking tool to press the AP1000i locking
mechanism shown in
12 Meru Access Point Installation Guide
(in ceiling)
Figure 6
Figure 7 below.
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
Figure 8.
above and rotate the AP1000i into place.
© 2013 Meru Networks, Inc.