Install The Access Point - Meru Networks AP1000 Installation Manuals

Install the Access Point

You can mount AP1000i in any of the following ways:
Mount AP1000i Below a Suspended Ceiling

Mount AP1000i on a Dropped Ceiling Bevel Tile

Mount AP1000i on an Interlude T-Bar

Mount AP1000i on a Wall

Mount AP1000i on a Wall Using the Optional Locking Kit

Set AP1000i on a Shelf

Mount AP1000i Above a Suspended Ceiling

Mount AP1000i Below a Suspended Ceiling
AP1000i ships ready to mount below a suspended ceiling; the built-in clips snap onto a ceiling rail. To
mount an AP1000i below a suspended ceiling, follow these steps:
1. Remove the ceiling tiles at the location the AP will be mounted.
2. Be sure that AP1000i is not locked by inserting the locking key into the Unlock mechanism as shown
in Figure 5 below.
Figure 5: Unlock AP1000i
Key
3. Align the ceiling t-bar with the AP1000i slots indicated in
© 2013 Meru Networks, Inc.
UNLOCK
Installing AP1000i
Figure 6 below.
Installing AP1000i 11