Meru Networks AP1000 Installation Manuals page 63

Mount AP1014i on an Interlude T-Bar
The mounting procedure for a ceiling that has interlude T-Bar supports is similar to that of mounting
on a suspended ceiling. However, this procedure requires a specialized mounting bracket (ACC-MNT-
SCRMKIT-04), as depicted in
Figure 49: T-Bar Mounting Bracket
1. Remove the ceiling tile alongside which the AP will be mounted.
2. Be sure that AP1014i is not locked by inserting the locking key into the Unlock mechanism as shown
in Figure 46 below.
Figure 50: Unlock AP1014i
Key
3. Align the mounting bracket with the AP1014i slots used for the ceiling t-bar in the previous section
(as shown in Figure
© 2013 Meru Networks, Inc.
Figure 49.
UNLOCK
42).
Installing AP1014i
Installing AP1014i 51