Meru Networks AP1000 Installation Manuals page 65

Mount AP1014i on a Wall
The AP1014i attaches directly to the wall. To mount an AP1014i on sheet rock or wall studs, follow
these steps:
1. Attach two appropriate screws (see
inches apart (76mm) as shown below
Figure 53: AP1014i Wall Bracket
Wall mount with screws.
2. Attach the PoE Ethernet cable to the Ethernet port shown in
Caution!
ports can be used to connect wired clients to the AP.
Figure 54: AP1014i Green Uplink Port
3. Align the screws on the wall with the keyholes on the AP and slide the unit down slightly. See
53.
© 2013 Meru Networks, Inc.
Additional Equipment
(Figure 53).
Be sure to connect the Ethernet cable to the green uplink port. The yellow
Installing AP1014i
for screw information) to the wall 3
Figure 54.
Figure
Installing AP1014i 53