Power Requirements; Additional Equipment - Meru Networks AP1000 Installation Manuals

Power Requirements

Note:
01.
Power Requirements
Radios on an AP1014i use 2x2 MIMO configuration. To power an AP1014i, use either an 802.3af or
802.3at PoE cable; either one works automatically with no configuration required. For a list of
supported PoEs, see the appendix

Additional Equipment

The following AP1014i mounting options require the listed additional equipment:
Installation Type
Ceiling mounting on a
suspended ceiling with or
without locking
Wall mounting
Wall mounting with locking
Ceiling mounting with lowered
tiles
44 Meru Access Point Installation Guide
If you want to lock AP1014i to the wall, you need the optional kit MNT-WMKIT-
Supported Power Over Ethernet Devices for Meru APs
Additional Equipment
Either an 802.3af or 802.3at PoE cable

Either an 802.3af or 802.3at PoE cable

Wall mount screws – Recommend #6, #8 (M3, M3.5)

Either an 802.3af or 802.3at PoE cable

Locking Kit 840-00052 MNT-WMKIT-01

Either an 802.3af or 802.3at PoE cable

Recessed Ceiling Mount Kit 840-0005x MNT-SCRMKIT-03 or -04

© 2013 Meru Networks, Inc.