Installing Ap1014I; Safety Precautions; Unpack The Ap1014I - Meru Networks AP1000 Installation Manuals

AP1014i is supported by System Director versions 5.3 and greater. This chapter describes how to install
and configure an AP1014i. It contains the following sections:

Safety Precautions



Unpack the AP1014i


Power Requirements

Additional Equipment


Installing AP1014i


Restoring AP1014i Settings

Check AP1014i LEDs

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
The AP1014i is only intended for installation in Environment A as defined in IEEE 802.3af. All directly
interconnected equipment (e.g., equipment sharing an electrical source) must be contained within the
same building, including the interconnected equipment's associated LAN connection.
Unpack the AP1014i
AP1014i is a single-radio AP that provides four additional wired Ethernet ports. Confirm that the ship-
ping box contains the following:
AP1014i

Locking tool for ceiling mount locking

© 2013 Meru Networks, Inc.
Safety Precautions
Chapter 4
Installing AP1014i
Installing AP1014i 43