Aileron Pushrod Installation - Seagull Models BEAVER TURBIN Assembly Manual

Mark.
2x10mm
Bend at the mark
M2 lock nut.
8mm
Metal clevis.
Snap keeper.
AILERON PUSHROD
INSTALLATION.
Please see below pictures.
Servo arm.
Snap keeper.
Nylon Snap keeper.
Hex Nut.
Fuel tubing.
Use a felt tip pen to mark the wire where
it crosses the hole. Use a pair of pliers to
put a shrp 90-degree bend in the wire at
.
the mark.
7