Seagull Models BEAVER TURBIN Assembly Manual page 34

Beaver Turbin
Thin CA.
2x8mm
Slide the brace into position. Use two
M3 x 25 socket head screws and a 2.5mm
hex wrench to attach the mounting brack-
et and brace in the flat in both position 1
&3. And use M3x15 for position 2.
34
Instruction Manual.
M3x25mm
1
M3x15mm
1
Remove the end of one of the longer
support braces. Slide the tubing onto the
brace, then place the end back on the
brace.
3
2
3
2
1