Installing The Fuselage Servos - Seagull Models BEAVER TURBIN Assembly Manual

Beaver Turbin
INSTALLING THE FLAP SERVO.
Repeat the procedure for the flap servo.
INSTALLING THE FLAP PUSHROD.
Repeat the procedure for the aileron
pushrod.
LIGHT COVER.
8
Instruction Manual.
Epoxy.

INSTALLING THE FUSELAGE SERVOS.

Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Install the rubber grommets and brass
collets onto all servos. Test fit the servos
into the servo mounts.
2) Secure the servos with the screws pro-
vided with your radio system.
Throttle servo.
.
.