Seagull Models BEAVER TURBIN Assembly Manual page 38

Beaver Turbin
AT POSITION 3.
Use the diagram to position the nylon
washers and the center diagonal brace
when installing the support braces to the
mounting brackets.
Diagonal brace
Front
Attach the mounting bracket to the rear
diagonal brace using an M3 x 15 socket
head cap screw, two nylon washers and an
M3 lock nut.
38
M3x15mm Socket Head Cap Screw
Nylon washer
Nylon washer
M3 locknut
Instruction Manual.
NOTE : Leave the screw slightly loose until
the floats are attached to the fuselage.
And final result for floating as shown.
M3x12mm