Kit Contents - Seagull Models BEAVER TURBIN Assembly Manual

Beaver Turbin
Instruction Manual.
INTRODUCTION.
Thank you for choosing the BEAVER TURBIN ARF by SG MODELS. The BEAVER TURBIN-
was designed with the intermediate/advanced sport flyer in mind. It is a semi scale airplane
which is easy to fly and quick to assemble. The airframe is conventionally built using balsa,
plywood to make it stronger than the average ARF, yet the design allows the aeroplane to be
kept light. You will find that most of the work has been done for you already. The motor mount
has been fitted and the hinges are pre-installed. Flying the BEAVER TURBIN is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read this
manual throughly before starting assembly of your BEAVER TURBIN. Use the parts listing
below to indentify all parts.
WARNING.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & REPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C model Flying Club. R/C Model Flying Clubs offer a variety of
training procedures designed to help the new pilot on his way to successful R/C flight. They
will also be able to advise on any insurance and safety regulations that may apply.

KIT CONTENTS

3
3
6
7
1
2
2
5
4
2