Installing The Spinner - Seagull Models BEAVER TURBIN Assembly Manual

Beaver Turbin
Balsa stick.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Battery.
18
Epoxy
Speed control.
Tie-wraps.
Instruction Manual.
Open the air exit hole.

INSTALLING THE SPINNER.

The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.