Engine Mount Installation; Mounting The Engine - Seagull Models BEAVER TURBIN Assembly Manual

C/A glue.
C/A glue.
Fuel pick up tube.
8) Connect the lines from the tank to the en-
gine and muffler. The vent line will connect
to the muffler and the line from the clunk to
the carburetor.
A
B
Balsa wood.
Vent tube.
Fuel fill tube.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flow
through easily.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install
the engine mount included with your
model.
4x30mm
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the firewall. Tighten the screws .
Make sure to use threadlock on the screws to
help prevent them from vibrating loose.

MOUNTING THE ENGINE.

1) Position the engine with the drive
washer (145mm) forward of the firewall
as shown.
.
Thread locker glue.
13