Aileron Pushrod Installation - Seagull Models MAULE SUPER ROCKET 15CC Assembly Manual

9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
M2x10mm
WWW.SEAGULLMODELS.COM
.
INSTALLING THE FLAP SERVO.
Repeat the procedure for the flap servo.

AILERON PUSHROD INSTALLATION.

Please see below pictures.
Use a felt tip pen to mark the wire where
it crosses the hole. Use a pair of pliers to
put a shrp 90-degree bend in the wire at
the mark.
Mark.
.
17