Menu 3 - Remote Start - Directed 5906 Installation Manual

Menu 3 - Remote start

Item Feature
1 Transmission Mode
2 Engine Checking Mode
3 Cranking Time (seconds)
4 Remote Start Runtime (minutes)
5 Activation Pulse Count
6 Turbo Mode (minutes)
7 Timer Mode Runtime (minutes)
8 Flex Relay Function
9 Diesel Start Delay (seconds)
10 Accessory during Diesel Start Delay ON
11 Status 2 Output
12 Parking Light Output
13 Anti-grind Output
14 Tach Mode Starter Release
15 Vehicle Temp Auto Report *
16 Remote Start Safelock
* Not available with the 1-way remote control.
1. Transmission Mode
1. Manual: requires 'Tachometer' for the Engine Checking Mode, and requires the user to successfully
perform a procedure when parking the vehicle before remote starter will engage.
2. Automatic: uses any of the Engine Checking Modes and does not require any special procedures
when parking.
2. Engine Checking Mode
1. Virtual Tach: battery voltage drop/rise during cranking determines when the starter output is
released. During runtime, constant voltage level is monitored to determine if the engine is running.
2. Voltage: starter output during cranking is a programmed duration (Set in Cranking Time). During
runtime, constant voltage level is monitored to determine if the engine is running.
3. OFF: starter output during cranking is a programmed duration (Set in Cranking Time). The remote
start will keep the ignition/accessories active for the programmed runtime whether the engine is
running or not.
4. Tachometer: tachometer input signal during cranking and runtime to determine when the starter
output is released and if the engine is running.
3. Cranking Time
• 0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/4.0 seconds: determines the starter output duration during
cranking for the 'Voltage' and the 'OFF' Engine Checking Mode options.
4. Remote Start Runtime
• 12/24/60 minutes: sets engine runtime during normal remote start operations.
5. Activation Pulse Count
• 1/ 2 pulses: sets the number of remote control commands received or Activation Input required to
activate and de-activate remote start.
21
Opt. 1 Opt. 2
Manual
Automatic
Virtual Tach
Voltage
0.6 sec. 0.8 sec.
12 min. 24 min.
1 2
No Turbo Mode On-1 min.
12 min. 3 min.
Ignition 2
Accessory 2
Wait-to Start
Timed 15 sec.
input
OFF
Status Latch Rear
Defogger
Constant Pulsed
ON OFF
Normal Increase
OFF On
OFF
On
Opt. 3 Opt.4
OFF Tachometer
1.0 sec. 1.2 sec.
60 min.
On-3 min. On-5 min.
6 min. 9 min.
Starter 2
Timed 30 sec. Timed 45 sec.
Pulse Rear
Defogger
OFF
Decrease
© 2016 Directed. All rights reserved.
Opt. 5+
1.4 (5)/ 1.6
(6)/ 1.8 (7) 2.0
(8)/ 4.0 (9)
On- 10 min.