158 en | Keypad Installer menu
20.6
[6] Cloud menu
Use the Cloud menu to enable or disable the Cloud capability in the control panel.
Cloud
1.
2.
3.
4.
5.
20.7
[7] USB Power
Use the USB Power menu to enable or disable the power to the USB port. For more
information, refer to USB power, page 67.
USB Power
1.
2.
3.
4.
2018.07 | 10 | F.01U.303.996
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [6] Cloud. The keypad shows the current status; Disabled, Enabled on Ethernet,
Enabled on cellular, or Enabled on both Ethernet and Cellular.
Press Edit or Enter (or escape from the menu to exit without making a change).
Use
/Next to go to the desired option.
Press Save or Enter. The keypad shows Parameter saved and closes the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [7] USB Power. The keypad shows the current status, USB Power is on or USB
Power is off.
Depending on keypad model:
Press the icon or softkey for the desired option.
-or-
Press Enter to change the status.
Escape from the menu.
Installation Manual
Control Panels
Bosch Security Systems, Inc.