Bosch B9512G-E Installation Manual page 23

Control Panels
Model
number
D185
ICP-SDI-9114 X
ICP-EZTS X
B901 X
D9210C X
*Approved for use on combination fire and burg systems when on a different bus from fire devices.
**Combination fire and burg systems using SDI devices might require an ICP-SDI-9114 to separate fire and
intrusion devices onto separate circuits.
1
ULC listed for Proprietary Burglary and Residential Fire only.
2 Keypad version 1.04 or higher.
3 Refer to the Dual Class B Initiating Module (D125B) Installation Instructions for compatible D125B devices.
4 Refer to the section within this section for compatible RADION devices.
5 Refer to the section within this section for compatible Inovonics devices.
7 Check for availability in your region.
Compatible detectors
The following is a sampling of wired detectors suitable for use on approved applications.
Other UL listed devices are available.
Model
FCC-380
F220-P with F220-B6
HUB
ISC-BDL2-WP12
MB-G6-12-R
ZX776Z
ZX794Z
ZX865
ZX938Z
ZX970
5110/4001-42
B810 wireless receiver compatible accessories
Refer to RADION receiver SD (B810) Installation Guide.
Bosch Security Systems, Inc.
X
X X X
X X
Door control (Access)
X X X
X X X
Name
Carbon Monoxide Detector
Photoelectric Smoke Detector with Detector Base
Potter HUB Holdup Button
Wheelock MB Series 12V 6 " Fire Bell (Red)
Wheelock MB Series 12V 6 " Fire Bell (Red)
PIR Motion Sensor [15 m (50 ft)] with POPIT
PIR Motion Sensor [24 m (80 ft)] with POPIT
PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT
PIR Motion Sensor [18 m (60 ft)] with POPIT
PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT
Rothenbuhler High Security Bell
X X X
X X X
X X X
X X X
Installation Manual
System overview | en
X X
X X X X
X X X
X X X
2018.07 | 10 | F.01U.303.996
23
X
X
X
X