Programming And Operating The Amax System; Option: Changing Menu Language; Accessing The Menus; Menu Navigation - Bosch AMAX panel 2100 Quick Start Manual

AMAX panel
5

Programming and Operating the AMAX System

The AMAX system can be programmed and operated with menus by using keypads and/or the
A-Link Plus remote programming software on a PC.
When all modules and devices are installed, the AMAX panel indicates the system status with
the LED status indicator on the system main board. A slow flashing in red (repeating on and
off with an interval of 1 second) indicates normal system operation.
The AMAX panel begins charging the battery. The green MAINS indicator on the keypad
indicates that the power supply is switched on and the keypad beeps.
Press any key on the keypad.
4
The keypad stops beeping and you are prompted to enter a code.
The AMAX system provides two types of default access codes:
– Installer Code: [1234]
– User Code: [2580] for master user 1 / [2581] for master user 2
5.1

Option: Changing Menu Language

If necessary, the menu language can be changed. If not, proceed to section Accessing the
Menus, page 11.
1. Enter the installer code [1234] + [58] or the user code [2580] / [2581] + [58] and press
[#].
The available menu languages are displayed.
2. Select the desired language on the keypad.
3. Press [#].
The menu language is changed.
P
5.2

Accessing the Menus

Accessing the Programming Menu
1. Confirm that the system is disarmed.
2. Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
3. Enter [958] + press [#].
You have now access to the programming menu for configuring the AMAX system.
P
The STAY and AWAY indicators flash to indicate the programming mode.
P
Accessing the User Menu
Enter a user code. The default users are master user 1 (code: [2580]) and master user 2
4
(code: [2581]).
The system displays [▼/▲] USER MENU *STAY #AWAY [-] INFO.
P
You have now access to the user menu for operating the AMAX system.
P
5.3

Menu Navigation

This section provides an overview of how to navigate the programming menu of a text keypad.
Selecting a Menu
1. Select the menu and operate according to the menu prompt.
2. Press [▼] or [▲] to navigate to the desired menu.
3. Press [#] to enter a menu.
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Quick Start Manual
Programming and Operating the AMAX System | en 11
2015.05 | 05 | F.01U.309.297