Installation And Control Panel Wiring (B600) - Bosch B9512G-E Installation Manual

70 en | Off-board outputs
For detailed instructions, refer to the corresponding document listed in Related
documentation, page 13.
11.2.1

Installation and control panel wiring (B600)

Calculate power consumption
Make sure that there is enough power for the module and the other powered devices that you
want to connect to the system.
Refer to On-board outputs, page 65.
Caution!
Remove all power (AC and battery) before making any connections. Failure to do so might
!
result in personal injury and/or equipment damage.
Installing the module
1.
2.
3.
Wiring the module to the control panel
Callout ᅳ Description
1 ᅳ ZONEX connection cable
2 ᅳ SDI interconnect cable
2018.07 | 10 | F.01U.303.996
For retrofit applications, remove the terminal strip from the module.
Hold the module mounting brackets onto the inside of the enclosure. Match the bracket
holes to a 3-hole mounting pattern on the enclosure
Use the supplied mounting screws to secure the module.
PWR+/R 29
28
A/Y
27
B/G
26
COM/B
ire
PWR+/R 26
A/Y 25
24
B/G
COM/B
23
ZONEX TAMPER RESET
2
1
Installation Manual
Control Panels
Bosch Security Systems, Inc.