ICPDAS PDS-811 User Manual page 98

Programmable Device Server with I/O Expansion Slot(s)
Step 10: Set the Init/Run Switch in "Run Mode" position, and then power-on reboot the PDS-8x1
controller.
Step 11: Execute ping you setting IP (Example: ping 10.0.8.246 –t) using a run command.
1
3
2
4
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Follow the procedure described
below:
1. Click the "Start" button and then
click "Run" to open the "Run
Command" dialog box.
2. In the "Run Command" dialog
box, type "pin 10.0.8.246 -t" in
the "Open:" field.
3. Click the "OK" button to open a
Command Prompt window.
4. The ping results should be smooth
and continuous
- 98 -