Echocmdno - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.3.9 EchoCmdNo

This command is used to query or set the EchoCmdNo parameter.
The EchoCmdNo parameter is used to set whether the PDS-8x1 prefixes the Virtual COM command
to the corresponding response. (Virtual COM commands are used to configure a PDS-8x1 through
TCP port 10000)
Effect: Immediate
Command Arguments
EchoCmdNo
EchoCmdNo = 0
EchoCmdNo = 1
Figure 6-3.9: The following is an example of a EchoCmdNo configuration.
EchoCmdNo = 0
Description
Queries the EchoCmdNo settings.
If EchoCmdNo = 0, a Virtual COM command number will not be
prefixed to the corresponding response.
If EchoCmdNo = 1, a Virtual COM command number will be
prefixed to the corresponding response.
EchoCmdNo = 1
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 83 -