Programmable Device Server with I/O Expansion Slot(s)
6.3.21 LOAD
This command is used to loads file to the built-in flash disk on PDS-8x1. It should be used to update
firmware only.
Effect: Immediate
Command
Arguments
load
※ "Load" is not a Telnet command.
Figure 6-3.20:
The following is an example of a Save = 0 configuration.
※When save = 0, the system doesn't back up the "autoexec.bat" and "vcom.ini" files to memory,
and doesn't clear the flash disk. It only loads the file that is selected specified.
Description
The command is coordinated with the MiniOS7 "load" command
and can be used to renew the "vcom3230.exe," "vcom.ini" or
"autoexec.bat" file(s).
Save=0
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Load vp8_3230.exe
- 91 -