Table of Contents
Advertisement
Programmable Device Server with I/O Expansion Slot(s)
6.3.17 DHCP
This command is used to set the DHCP client to either enabled or disabled.
DHCP function will get a dynamic IP address setting for PDS-8x1 automatically. Thus it's
recommended to disable DHCP function and use a static IP address setting. This prevents you to
configure virtual COM mappings again and again.
Effect: Immediate
Command
Arguments
DHCP
= 0
DHCP
= 1
Figure 6-3.17:
The following is an example of a DHCP configuration.
Description
Disables the DHCP client.
Enables the DHCP client.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
- 88 -
Advertisement
Table of Contents
