Programmable Device Server with I/O Expansion Slot(s)
4.3.2 Set Remote VCOM3 Connection
The "Set Remote VCOM3 Connection" section provides sets the pair-connection functions, the
more detailed information regarding pair-connection applications settings, please refer to the
Section 5.3 Pair-connection
The following is an overview of the parameters contained in the Remote Vcom3 connection Setup
Page section:
Item
Add COM "Number"
connect to COM "Number"
@ IP= "IP Address"
cmd port= "command port"
(default: 10000)
Add COM "Number"
connect to IP= "IP Address"
Port= "TCP port"
MODBUS gateway
Applications.
Serial COM port number of the local device (Master)
Serial COM port number of the remote device (Slave)
IP address of the remote device (Slave)
Command Port number of the remote device (Slave)
Serial COM port number of the local device (Master)
IP address of the remote device (Slave)
TCP Port number of the remote device (Slave)
If the "MODBUS gateway" checked, the serial port is specified
as gateway from the Modbus RTU or Modbus ASCII (Master)
to Modbus TCP for the remote device (Slave)
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Description
- 51 -