Table of Contents
Advertisement
Programmable Device Server with I/O Expansion Slot(s)
Step 4: Click the "Logout" to complete the operation, and then power-on reboot the PDS-8x1
controller.
6
The following is an overview of the factory default settings:
Factory Default Settings
Network Settings
IP Address
Gateway Address
Subnet Mask
DHCP
Basic Settings
Alias
Note:
User can restore PDS-8x1 password to default value "admin" by using "config=RESET"
console command (refer to Chapter 6 Console/Telnet Commands List). This command sets
most configurations of PDS-8x1 to factory setting. It requires rebooting the PDS-8x1 for
loading new configuration (includes default password).
192.168.255.1
192.168.0.1
255.255.0.0
Disabled
N/A
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
- 58 -
Advertisement
Table of Contents
