ICPDAS PDS-811 User Manual page 40

Programmable Device Server with I/O Expansion Slot(s)
Web Server
Telnet Server
Ping Gateway at start
TCP ACK Delay (ms)
Broadcast
Connection WDT
timeout (ms)
Network WDT timeout
(System Timeout) (ms)
This parameter is used to enable or disable Web
Server function.
0 = Disabled, 1 = Enabled
This parameter is used to enable or disable Telnet
Server function.
0 = Disabled, 1 = Enabled
If the setting is 1 (enabled), the PDS-8x1 controller will
send a ping packet to the gateway during the power-
on stage. It is used to inform the gateway that a PDS-
8x1 controller (itself) has joined the network.
0 = Disabled, 1 = Enabled
PDS-8x1 controller does not want to send an empty
ACK followed by a TCP data packet 1ms later, every
time. So it delays a little (TCP ACK Delay), and then
can combine the ACK and data packet into one. This
efficiency reduces the number of packets and
reduces network loadings.
This parameter is used to receive or reject UDP
broadcast packets.
1 = receive UDP broadcast packets
0 = reject UDP broadcast packets
If the PDS-8x1 controller does not receive any data
from a client PC within the period of the "Connection
WDT timeout", the module will close the connection
to the client.
0 = Disabled, Min. setting value = 10000
If the PDS-8x1 controller does not receive any data
from any of the clients within the period of the
"Network WDT timeout", the module will reboot
itself.
This setting is the same as "SystemTimeout" setting
(unit: ms) on Console/Telnet command, and is the
same as "/STxxx" in command line parameter (unit:
seconds).
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
1
1
0
(Disabled)
50 ms
1
0
(Disabled)
0
(Disabled)
- 40 -