ICPDAS PDS-811 User Manual page 48

Programmable Device Server with I/O Expansion Slot(s)
Slave Timeout
Master ACK timeout
(MAT)
Save current settings
to EEPROM
Apply current settings
SET COM PORT
Note: After configuring IP filter settings,
please confirm that the "Save current settings to
EEPROM" and "Apply current settings" option are
checked, and then click the "SET COM PORT" button.
In M1 (Slave Mode), the slave mode timeout setting is
use to set the waiting time after last character of the
request sent to the device. If the device does not
respond within the timeout value, the PDS-8x1
controller will return a timeout error and process next
request.
If the PDS-8x1 controller does not receive any data from
Slave for a certain period, the PDS-8x1 controller will
return an ACK character to Master and process next
request based on the configured timeout value.
If the "SET COM PORT" button is clicked with checking "Save current
settings to EEPROM" option, the new settings will be saved to the PDS-
8x1 controller only and the new settings will be valid after the next
power-on.
If the "Apply current settings" checked when the "SET COM PORT"
button is clicked, the new settings will be valid immediately.
Click this button to save the revised settings to the PDS-8x1 controller.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
200 ms
0
(Disabled)
- 48 -