ICPDAS PDS-811 User Manual page 41

Programmable Device Server with I/O Expansion Slot(s)
Master IP
Reset System
SET TCP/IP
When user uses "config=RESET" Console/Telnet
command to clear the EEPROM, the "Network WDT
timeout" (SystemTimeout, /ST) setting will also be
cleared to 0.
Users have to configure this setting again by
"SystemTimeout" Console/Telnet command.
0 = Disabled, Min. setting value = 30000
If the Master IP is set, only the client using Master IP
can change the COM Port configuration. It is to
prevent the COM Port configuration changed by
other clients.
If the "Reset System" option is checked, the PDS-8x1 controller will
reboot itself after the saving operation is complete, otherwise the
original settings will still be valid until the next power-on.
Click this button to save the revised settings to the PDS-8x1
controller.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
empty
- 41 -