Reset; Quit - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.3.23 RESET

This command is used to reboot the PDS-8x1 controller.
Effect: Immediate
Command Arguments
reset
Figure 6-3.23: The following is an example of a RESET configuration.

6.3.24 QUIT

This command is used to stop and quit the firmware of PDS-8x1 controller.
Effect: Immediate
Command Arguments
quit
Figure 6-3.24: The following is an example of a Quit configuration.
Description
Reboot the PDS-8x1 controller.
Description
Quits the firmware.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 94 -