Table of Contents
Advertisement
Programmable Device Server with I/O Expansion Slot(s)
5.
Connect both the PDS-8x1 and the Host computer to the same sub-network or the same
Ethernet Switch.
6.
Short the RxD and TxD pins
7.
Short the TxD1 (Pin 19) and RxD1 (Pin 37) pins
bus) for example of self-test.
8.
Supply +24 V
DC
The wiring diagram is as follows:
9.
Verify that the System LED indicator is
flashing on the PDS-8x1 controller.
of the PDS-8x1 controller for self-test.
(+10 ~ +30 V
) power
to the PDS-8x1 controller.
DC
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
of the 4-Port I-8114iW module (RS-232
- 28 -
Advertisement
Table of Contents
