Table of Contents
Advertisement
Programmable Device Server with I/O Expansion Slot(s)
4.4.3 Restore to Factory Default Settings
Use the following procedure to reset all parameters to their original factory default settings:
Step 1: Click the "Login" tab at the PDS-8x1 Misc Setup Page to proceed to the Login Page.
1
Step 2: Enter the password in the "PASSWORD:" field (use the default password "admin") and click
the "LOGIN" button to proceed to the settings page. If you want to change default password,
please refer to
Section 4.4.2 Change
Password.
2
Default Password:
admin
3
Step 3: Check the "Restore to Factory Default Settings" option and click the "UPDATE" button to
update the setting.
4
5
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
- 57 -
Advertisement
Table of Contents
