Udp - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.3.18 UDP

This command is used to configure the UDP Search function.
UDP is used to set the action mode for when a PDS-8x1 receives a UDP search command.
Effect: Immediate
Command Arguments
UDP = 0
UDP = 1
UDP = 2
Figure 6-3.18: The following is an example of a UDP configuration.
Description
Rejects UDP search commands.
The PDS-8x1 will not reply to the UDP search command, and can
not be searched again.
Replies to UDP search commands.
The PDS-8x1 controller will reply to the UDP search command,
and can be searched.
Replies to UDP search commands till a client is connected.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 89 -