Com - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.3.4 COM

This command queries or sets the configuration of the COM Ports (Baud Rate/Parity/Stop bits).
Effect: Immediate
Command Arguments
com
com n
N= BaudRate,
com
DataBits,
Parity,StopBit(s)
Figure 6-3.4: The following is an example of a COM configuration.
Description
Queries the configuration of all COM Ports.
Queries configuration of COM Port "n".
If n = 0, the configuration of all COM Ports will be listed in the
same way as using the command "com" above.
Sets the configuration of COM Port "n".
If n = 0, the settings will be valid for all Com Ports on the PDS-
8x1.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 78 -