Comparison Sheet (Init, Run And Console Modes) - ICPDAS PDS-811 User Manual

Programmable Device Server with I/O Expansion Slot(s)

6.2 Comparison Sheet (Init, Run and Console Modes)

Mode Firmware
Stop
Init Mode is used to upgrade firmware and accepts MiniOS7 commands (from
Init
PDS.COM1) only.
Running
Run Mode is used for Virtual COM applications, and accepts Virtual COM commands
Run
(TCP port 10000) and Telnet commands (TCP port 23).
Running
Console Mode is used to configure the Virtual COM.
Console
PDS.COM1 is the console port that accepts console commands while other ports are
still working with Virtual COM applications.
VCOM Commands
No
Yes
Yes
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
Telnet Commands
No
Yes
Yes
Console Commands
No
No
Yes
- 72 -