ICPDAS PDS-811 User Manual page 44

Programmable Device Server with I/O Expansion Slot(s)
Save to EEPROM
Reload from EEPROM
Apply the current
settings
UPDATE
Note: After configuring IP filter settings, please confirm
that the "Save to EEPROM" and "Apply the current settings"
option are checked, and then click the "UPDATE" button.
If the "UPDATE" button is clicked with checking "Save to EEPROM"
option, the new settings will be saved to the PDS-8x1 controller only
and the new settings will be valid after the next power-on.
If the "UPDATE" button is clicked with checking "Reload from
EEPROM" option, PDS-8x1 controller can apply the settings from
EEPROM immediately.
If the "Apply the current settings" checked when the "UPDATE"
button is clicked, the new settings will be valid immediately.
Click this button to save the revised settings to the PDS-8x1
controller.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 44 -