ICPDAS PDS-811 User Manual page 82

Programmable Device Server with I/O Expansion Slot(s)
6.3.8 M
This command is used to query or set the echo mode.
Effect: Immediate
Command Arguments
M
M = 0
M = 1
M =2
Figure 6-3.8: The following is an example of a M configuration.
Description
Queries the echo mode settings.
Sets the Multi-echo mode to enable.
When set to multi-echo mode, the PDS-8x1 echoes data from a
device to all clients that are connected.
Sets the Single-echo mode to enable.
When set to single-echo mode, the PDS-8x1 echoes data from a
device to the client that requested the service.
Sets the Half-Save Mode to enable.
If only one client connects to the PDS-8x1 controller, the
operation mode same as M0 mode; and if there are two or more
clients connecting to the PDS-8x1 controller, the operation
mode same as M1 mode.
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015 - 82 -